Epox-E-Glue is high strength epoxy adhesive mixed in an equal volume 1:1 ratio for ease of
handling.
- non-critical easy to use 1:1 ratio by volume simply mix two equal scoops
- extended working life of 40 minutes
- full cure within 24 hours at temperatures above 10 deg C
- non-sagging thixotropic paste formulation easily fills large gaps
- bonds strongly to most substrates
- totally waterproof
Bote-Cote Epox-E-Glue – Concrete Repair
Application
Best results will be obtained when both mating surfaces are coated with glue. Bring both coated
parts together and maintain firm contact until the glue has set and strength has developed.
Generally this will be within 24 hours, but low temperatures will retard the cure rate. Do not clamp
tightly as a weak joint may result from glue starvation.
If bonding porous materials such as foams, concrete, timber end grain, etc, seal the surface by
pre-coating it with Bote-Cote liquid epoxy resin. This will prevent joint starvation due to the porous
substrate absorbing resin out of the adhesive.